Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018TRANSIT CONNECT XL, VAN CARGOREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICALENGINE - 2.5L DURATEC (125KW/170PS)SPECIFICATIONSCAMSHAFT
2018 Ford Transit Connect XL, Van Cargo
Engine - 2.5L DURATEC (125KW/170PS): Specifications: Camshaft
2018 Ford Transit Connect XL, Van CargoSECTION Camshaft
| Item | Specification | ||
|---|---|---|---|
| Lobe lift - intake | 9.44 mm (0.371 in) | ||
| Lobe lift - exhaust | 8.18 mm (0.322 in) | ||
| Runout (1) (1) | 0.03 mm (0.001 in) | ||
| Thrust clearance | 0.09-0.24 mm (0.003-0.009 in) | ||
| Journal diameter | 24.96-24.98 mm (0.982-0.983 in) | ||
| Journal-to-bore clearance | 0.035-0.080 mm (0.001-0.003 in) | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.