Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Heated Windshield
The heated windshield system only operates when the engine is running. When the heated windshield switch is activated, the BCM activates the heated windshield relay (located in the BJB). When the heated windshield relay is activated, the left and right windshield grids are energized and the BCM supplies voltage to illuminate the heated windshield switch status LED. The heated windshield system may also be automatically activated as an extra load for accelerated engine warm-up, however the heated windshield status LED remains off unless the heated windshield switch is activated.
The BCM deactivates the heated windshield relay when one of these conditions is met:
- The heated windshield switch is pressed when the feature is active.
- Ignition state is changed from ON to OFF.
- A predetermined timer completes.
- Battery voltage has dropped below a specified threshold (load management strategy).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.