Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Key On Engine Running (KOER) On Demand Self-Test
The KOER on demand self-test is a functional test of the PCM, and is carried out with the ignition in the START position, the engine running and the vehicle stopped. A check of certain inputs and outputs is made during operating conditions and at a normal temperature. The brake pedal position (BPP) test is a part of the KOER on demand self-test and must be carried out during this operation. A fault must be present at the time of testing for the KOER on demand self-test to detect the fault. When a fault is detected, a DTC is output on the data link at the end of the test when requested by a scan tool. The KOER on demand self-test can be executed with the gear selector in PARK only.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.