Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018FUSION ENERGI TITANIUMREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - DIAGNOSTIC METHODS (HYBRID)CLEAR THE CONTINUOUS DIAGNOSTIC TROUBLE CODES (DTCS) IN THE TRANSMISSION CONTROL MODULE (TCM)DESCRIPTION
2018 Ford Fusion Energi Titanium
Clear The Continuous Diagnostic Trouble Codes (DTCs) In The Transmission Control Module (TCM): Description
2018 Ford Fusion Energi TitaniumSECTION Description
NOTE:
Clearing the continuous DTCs in the TCM can be carried out with the ignition in the ON position. It can also be carried out once the ignition is cycled to the START position, as long as the vehicle is in PARK.
Clearing the continuous DTCs in the TCM allows the scan tool to command the TCM to clear all DTCs along with freeze frame information.
The following events occur when the continuous DTCs are cleared in the TCM:
- the number of DTCs are cleared
- the DTCs are cleared
- the freeze frame data is cleared
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.