Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018FUSION ENERGI TITANIUMREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTSEATSSEATING SYSTEM - FRONT - FUSION (HYBRID/ENERGI)DIAGNOSIS AND TESTINGFRONT SEATSDTC CHART(S)FCIM DTC CHART
2018 Ford Fusion Energi Titanium
FCIM DTC Chart
2018 Ford Fusion Energi TitaniumSECTION FCIM DTC Chart
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| DTC | Description | Action |
|---|---|---|
| B1034:11 | Left Front Seat Heater Element: Circuit Short To Ground | GO to Pinpoint Test J |
| B1034:12 | Left Front Seat Heater Element: Circuit Short To Battery | GO to Pinpoint Test J |
| B1034:13 | Left Front Seat Heater Element: Circuit Open | GO to Pinpoint Test J |
| B1036:11 | Right Front Seat Heater Element: Circuit Short To Ground | GO to Pinpoint Test K |
| B1036:12 | Right Front Seat Heater Element: Circuit Short To Battery | GO to Pinpoint Test K |
| B1036:13 | Right Front Seat Heater Element: Circuit Open | GO to Pinpoint Test K |
| B1038:11 | Left Front Seat Heater Sensor: Circuit Short To Ground | GO to Pinpoint Test J |
| B1038:15 | Left Front Seat Heater Sensor: Circuit Short To Battery or Open | GO to Pinpoint Test J |
| B103A:11 | Right Front Seat Heater Sensor: Circuit Short To Ground | GO to Pinpoint Test K |
| B103A:15 | Right Front Seat Heater Sensor: Circuit Short To Battery or Open | GO to Pinpoint Test K |
| All other Diagnostic Trouble Codes (DTCs) | - | Refer to the appropriate Information and Entertainment System article. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.