Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018F-150 XLT, 4D PICKUP EXTRA CAB, 3.5L ENG VIN G, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXDTC INDEX (ENGINE COOLING SYSTEM - MULTIFUNCTION ELECTRONIC MODULES)EXTERIOR LIGHTING SYSTEM DTCSHEADLAMPSSCCM
2018 Ford F-150 XLT, 4D Pickup Extra Cab, 3.5L Eng VIN G, RWD
Exterior Lighting System DTCS: Headlamps: SCCM
2018 Ford F-150 XLT, 4D Pickup Extra Cab, 3.5L Eng VIN G, RWDSECTION SCCM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1007:09 | High-Beam Headlamp Switch: Component Failure | INSTALL a new LH steering column multifunction switch. REFER to: Steering Column Multifunction Switch LH
. TEST the system for normal operation. If the concern still exists, INSTALL a new SCCM. REFER to: Steering Column Control Module (SCCM) . |
| B1D36:09 | Turn Indicator Switch: Component Failure | INSTALL a new LH steering column multifunction switch. REFER to: Steering Column Multifunction Switch LH
. TEST the system for normal operation. If the concern still exists, INSTALL a new SCCM. REFER to: Steering Column Control Module (SCCM) . |
| All other SCCM Diagnostic Trouble Codes (DTCs) | - | REFER to: Steering Wheel and Column Electrical Components . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.