Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018EXPEDITION MAX LIMITED, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXDTC INDEX (POWERTRAIN - WIPER SYSTEM AND WASHER SYSTEM)REAR VIEW MIRROR DTCSDDM
2018 Ford Expedition MAX Limited, 4WD
Rear View Mirror DTCS: DDM
2018 Ford Expedition MAX Limited, 4WDSECTION DDM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B11F6:11 | Driver Folding Mirror Motor: Circuit Short To Ground | GO to Pinpoint Test E |
| B11F6:15 | Driver Folding Mirror Motor: Circuit Short To Battery or Open | GO to Pinpoint Test E |
| B1C09:11 | Driver Left/Right Mirror Motor: Circuit Short To Ground | GO to Pinpoint Test B |
| B1C10:11 | Driver Up/Down Mirror Motor: Circuit Short To Ground | GO to Pinpoint Test B |
| B1C13:11 | Driver Up/Down Mirror Motor Feedback: Circuit Short To Ground | GO to Pinpoint Test C |
| B1C13:15 | Driver Up/Down Mirror Motor Feedback: Circuit Short To Battery Or Open | GO to Pinpoint Test C |
| B1C14:11 | Driver Left/Right Mirror Motor Feedback: Circuit Short To Ground | GO to Pinpoint Test C |
| B1C14:15 | Driver Left/Right Mirror Motor Feedback: Circuit Short To Battery Or Open | GO to Pinpoint Test C |
| C1B15:11 | Sensor Supply Voltage B: Circuit Short To Ground | GO to Pinpoint Test C |
| C1B15:15 | Sensor Supply Voltage B: Circuit Short To Battery or Open | GO to Pinpoint Test C |
| All other DDM Diagnostic Trouble Codes (DTCs) | - | REFER to: Locks, Latches and Entry Systems . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.