Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018EDGE SEL, 2.0L ENG VIN 9, AWDREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXDTC INDEX (ANTI-LOCK BRAKE SYSTEM AND STABILITY CONTROL - EXTERIOR LIGHTING SYSTEM)AUTOMATIC TRANSMISSION EXTERNAL CONTROLS DTCSPCM
2018 Ford Edge SEL, 2.0L Eng VIN 9, AWD
Automatic Transmission External Controls DTCS: Pcm
2018 Ford Edge SEL, 2.0L Eng VIN 9, AWDSECTION Pcm
NOTE:
These DTCs apply to the 2.7L, 3.5L engines only, for the 2.0L engine refer to Symptom Chart
.
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| P0815 | Upshift Switch Concerns, Open Or Shorted Circuit | GO to Pinpoint Test C |
| P0816 | Downshift Switch Concerns, Open Or Shorted Circuit | GO to Pinpoint Test C |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.