Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014TAURUS LIMITED, 2.0L ENG VIN 9REPAIR AND DIAGNOSISSTEERINGSTEERING COLUMNSPECIFICATIONS
2014 Ford Taurus Limited, 2.0L Eng VIN 9
Steering Column: Specifications
2014 Ford Taurus Limited, 2.0L Eng VIN 9SECTION Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| HSWM screws | 3 | - | 27 |
| Steering column bolts | 25 | 18 | - |
| Steering column opening trim panel screws | 5 | - | 44 |
| Steering column shaft boot nuts | 9 | - | 80 |
| Steering column shaft-to-steering column bolt | 25 | 18 | - |
| Steering column shaft-to-steering gear bolt | 25 | 18 | - |
| Steering column tilt motor screws | 3 | - | 27 |
| Steering wheel bolt | 47 | 35 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.