Front Control/Display Interface Module (FCDIM) Connector End View (C2123)

2014 Ford Taurus Limited, 2.0L Eng VIN 9SECTION Front Control/Display Interface Module (FCDIM) Connector End View (C2123)
Fig 1: Identifying Front Control/Display Interface Module (FCDIM) Connector (C2123)
G09301545Courtesy of FORD MOTOR CO.
Pin Circuit Gauge Circuit Function Qualifier
1 SBP09 (RD) 22 FUSE - 9 OR CIRCUIT BREAKER  
2 * * Not Used  
3 * * Not Used  
4 VDB13 (BU-GY) 22 CTRL MOD. - MULTIMEDIA CAN BUS HIGH  
5 VDB14 (VT-GY) 22 CTRL MOD. - MULTIMEDIA CAN BUS LOW  
6 * * Not Used  
7 * * Not Used  
8 * * Not Used  
9 GD374 (BK-WH) 22 GROUND - TUNNEL (BC3T)  
10 * * Not Used  
11 * * Not Used  
12 * * Not Used  
Available Pigtail Kits  
Pigtail Kit Part Number WPT-1278 
G09301546
Service Part Number: CU2Z-14S411-ABA 
Gauge: 18 
Pin material: Tin (greased) 
Cavities: 12 
Vehicle Uses
  • Message Center
  • Module - Driver Information
  • Module - Front Interface
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.