SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014TAURUS LIMITED, 2.0L ENG VIN 9REPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXINFORMATION CENTER DTCSPOWERTRAIN CONTROL MODULE (PCM)
2014 Ford Taurus Limited, 2.0L Eng VIN 9

Powertrain Control Module (Pcm)

2014 Ford Taurus Limited, 2.0L Eng VIN 9SECTION Powertrain Control Module (Pcm)
PCM DTC CHART

DTC Description Action
P0457 Evaporative Emission System Leak Detected (fuel cap loose/off) REFER to ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) (SECTION 3) .
P0460 Fuel Level Sensor A Circuit REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first.
If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST B for single sender L-shaped fuel tank or GO to PINPOINT TEST C for dual sender saddle-type fuel tank.
P0461 Fuel Level Sensor A Circuit Range/Performance REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first.
If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST B for single sender L-shaped fuel tank or GO to PINPOINT TEST C for dual sender saddle-type fuel tank.
P0462 Fuel Level Sensor A Circuit Low REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first.
If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST B for single sender L-shaped fuel tank or GO to PINPOINT TEST C for dual sender saddle-type fuel tank.
P0463 Fuel Level Sensor A Circuit High REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first.
If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST B for single sender L-shaped fuel tank or GO to PINPOINT TEST C for dual sender saddle-type fuel tank.
P1678 Low Oil Pressure Lamp Control Circuit GO to PINPOINT TEST AH .
P2065 Fuel Level Sensor B Circuit REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first.
If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST C .
P2066 Fuel Level Sensor B Circuit Range/Performance REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first.
If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST C .
P2067 Fuel Level Sensor B Circuit Low REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first.
If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST C .
P2068 Fuel Level Sensor B Circuit High REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first.
If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST C .
All Other DTCs - REFER to MULTIFUNCTION ELECTRONIC MODULES .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.