Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014TAURUS LIMITED, 2.0L ENG VIN 9REPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXENGINE COOLING SYSTEM DTCS
2014 Ford Taurus Limited, 2.0L Eng VIN 9
Engine Cooling System DTCS
2014 Ford Taurus Limited, 2.0L Eng VIN 9SECTION Engine Cooling System DTCS
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| P1285 | Cylinder Head Overtemperature Condition | GO to PINPOINT TEST B . |
| P1299 | Cylinder Head Overtemperature Protection Active | GO to PINPOINT TEST B . |
| P0125 | Insufficient Coolant Temp For Closed Loop Fuel Control | GO to PINPOINT TEST C . |
| P0128 | Coolant Thermostat (Coolant Temp Below Thermostat Regulating Temperature) | GO to PINPOINT TEST C . |
| P0480 P0481 P0482 | Fan 1, 2 or 3 Control Circuit, Respectively | REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) . |
| All Other PCM DTCs | - | REFER to ELECTRONIC ENGINE CONTROLS . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.