Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2014MUSTANG GT, 2D COUPE, AUTOMATIC TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALOEM CONNECTOR END VIEWSILLUMINATION DIMMER SWITCH CONNECTOR END VIEW (C2298)

2014 Ford Mustang GT, 2D Coupe, Automatic Trans

Illumination Dimmer Switch Connector End View (C2298)

2014 Ford Mustang GT, 2D Coupe, Automatic TransSECTION Illumination Dimmer Switch Connector End View (C2298)

Fig 1: Identifying Illumination Dimmer Switch Connector (C2298)

Courtesy of FORD MOTOR CO.

Pin	Circuit	Gauge	Circuit Function
1	VLN18 (BU-WH)	22	DIMMER - IP/SWITCH ILLUMINATION
2	CLN28 (GN-BU)	22	SWITCH - DOME LAMP
3	*	*	Not Used
4	RLN29 (WH-OG)	22	CTRL MOD. - DIMMER RETURN
5	*	*	Not Used
6	VLN18 (BU-WH)	22	DIMMER - IP/SWITCH ILLUMINATION

Available Pigtail Kits
Pigtail Kit Part Number WPT-1006	Service Part Number: 7U2Z-14S411-NB Gauge: 18 Pin material: Silver Cavities: 6 Vehicle Uses Lamp - Dimmer Switch Module - Front Interface Switch - Adjustable Pedal Switch - Dimmer Switch - Dimmer (Instrument Panel) Switch - Message Center Switch - Power Window - Passenger (Front)
Pigtail Kit Part Number WPT-895	Service Part Number: 7U2Z-14S411-NA Gauge: 18 Pin material: Tin Cavities: 6 Vehicle Uses Junction Box - Relay Sensor - Throttle Position Sensor - Transmission Oil Temperature Speaker - Tweeter - RH - Rear Switch - Convertable Top

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.