SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014FOCUS TITANIUM, 4D HATCHBACK, AUTOMATIC DCT TRANS, GAS/ETHANOLREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEX (EXCEPT ELECTRIC)INFORMATION & ENTERTAINMENT SYSTEM - AM/FM/CD/SYNC DTCSGLOBAL POSITIONING SYSTEM MODULE (GPSM) - PREMIUM DTC TABLE
2014 Ford Focus Titanium, 4D Hatchback, Automatic DCT Trans, Gas/Ethanol

Global Positioning System Module (GPSM) - Premium DTC Table

2014 Ford Focus Titanium, 4D Hatchback, Automatic DCT Trans, Gas/EthanolSECTION Global Positioning System Module (GPSM) - Premium DTC Table
DTC INDEX

DTC Description Action
U0140:00 Lost Communication With Body Control Module: No Sub Type Information GO to PINPOINT TEST AA
U0155:00 Lost Communication With IPC  Module: No Sub Type Information GO to PINPOINT TEST AB
U0422:00 Invalid Data Received from Body Control Module: No Sub Type Information RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the BCM  . REFER to: BODY CONTROL MODULE (BCM) .
U0423:00 Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the IPC  . REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
U3000:09 Control Module: Component Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:09 is retrieved again, PERFORM a battery reset by disconnecting the battery for 5 minutes, then reconnecting it.
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:09 is retrieved again, INSTALL a new GPSM  .

    REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3000:41 Control Module: General Checksum Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:41 is retrieved again, INSTALL a new GPSM  .

    REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3000:42 Control Module: General Memory Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:42 is retrieved again, INSTALL a new GPSM  .

    REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AF
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AG
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.