Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014F-450 SUPER DUTY PLATINUM, RWDREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXCRUISE CONTROL SYSTEM DTCSPCM DTC TABLE
2014 Ford F-450 Super Duty Platinum, RWD
PCM DTC Table
2014 Ford F-450 Super Duty Platinum, RWDSECTION PCM DTC Table
DTC INDEX
| DTCs | Description | Action |
|---|---|---|
| P0504 | Brake Switch A/B Correlation | GO to PINPOINT TEST B . |
| P0572 | Brake Switch A Circuit Low | GO to PINPOINT TEST B . |
| P0573 | Brake Switch A Circuit High | GO to PINPOINT TEST B . |
| P1703 | Brake Switch Out Of Self -Test Range | GO to PINPOINT TEST B . |
| P193D (Gasoline engine only) | Cruise Control Multi-Function Input Signal | GO to PINPOINT TEST D . |
| All other DTCs | - | REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) or ENGINE CONTROLS - INTRODUCTION (DIESEL) (SECTION 0) . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.