Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2014F-450 SUPER DUTY PLATINUM, 4WDREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXMODULE CONFIGURATION SYSTEM DTCS

2014 Ford F-450 Super Duty Platinum, 4WD

Module Configuration System DTCS

2014 Ford F-450 Super Duty Platinum, 4WDSECTION Module Configuration System DTCS

DTC INDEX

DTC	Description	Source	Action
B2477	Module Configuration Failure	ACM (without navigation) CDIM Dual Climate Controlled Seat Module (DCSM) Driver Seat Module (DSM)	CARRY OUT Programmable Module Installation (PMI). REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0602	Powertrain Control Module Programming Error	PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0605	Internal Control Module Read Only Memory (ROM ) Error	PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1635	Tire/Axle Out of Acceptable Range	PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1639	Vehicle ID Block Corrupted, Not Programmed	PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300:00	Internal Control Module Software Incompatibility: No Sub Type Information	PCM RCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U201A:51	Control Module Main Calibration Data: Not Programmed	ACM (with navigation)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2050	No Application Present	ACM (without navigation) CDIM DSM PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2051	One or More Calibration Files Missing/Corrupt	ACM (without navigation)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00	Initial Configuration Not Complete: No Sub Type Information	ABS module ACM (with navigation) Audio DSP module Body Control Module (BCM) GPSM HVAC module Instrument Panel Cluster (IPC) Restraints Control Module (RCM) Steering Column Control Module (SCCM)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00	Initial Configuration Not Complete: No Sub Type Information	APIM	CARRY OUT APIM programming. Refer to the appropriate article for the procedure.
U2100:55	Initial Configuration Not Complete: No Sub Type Information	HSWM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2101:00	Control Module Configuration Incompatible: No Sub Type Information	ABS module ACM (with navigation) Audio DSP module GPSM SCCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2101:00	Control Module Configuration Incompatible: No Sub Type Information	APIM	CARRY OUT APIM programming. Refer to the appropriate article for the procedure.
U2200:00	Control Module Configuration Memory Corrupt; No Sub Type Information	RCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2200:55	Control Module Configuration Memory Corrupt: Not Configured	BCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:54	Central Configuration: Missing Calibration	Transfer Case Control Module (TCCM)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:55	Central Configuration: Not Configured	TCCM RCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:56	Central Configuration: Invalid/Incompatible Configuration	ABS module BCM TCCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:64	Central Configuration: Signal Plausibility Failure	ABS module RCM TCCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U3002:62	Vehicle Identification Number: Signal Compare Failed	ABS module RCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.