Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014F-150 FX2, 2D PICKUPREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 662 (MODULE COMMUNICATIONS NETWORK)
2014 Ford F-150 FX2, 2D Pickup
Section 662 (Module Communications Network)
2014 Ford F-150 FX2, 2D PickupSECTION Section 662 (Module Communications Network)
WARNING: This page is about a different car, the 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Diagnosis And Testing
- Communications Network
- Notes
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A : The Pcm Does Not Respond To The Scan Tool
- Pinpoint Test B : The Abs Module Does Not Respond To The Scan Tool
- Pinpoint Test C : The BCM Does Not Respond To The Scan Tool
- Pinpoint Test D : The IPC Does Not Respond To The Scan Tool
- Pinpoint Test E : The PSCM Does Not Respond To The Scan Tool
- Pinpoint Test F : The RCM Does Not Respond To The Scan Tool
- Pinpoint Test G : The OCSM Does Not Communicate With The Scan Tool
- Pinpoint Test H : The HUD Module Does Not Respond To The Scan Tool
- Pinpoint Test I : The SCCM Does Not Respond To The Scan Tool
- Pinpoint Test J : The C-Cm Does Not Communicate With The Scan Tool
- Pinpoint Test K : The PAM Does Not Respond To The Scan Tool
- Pinpoint Test L : The RFA Module Does Not Respond To The Scan Tool
- Pinpoint Test M : The APIM Does Not Respond To The Scan Tool
- Pinpoint Test N : The ACM Does Not Respond To The Scan Tool
- Pinpoint Test O : The FCIM Does Not Respond To The Scan Tool
- Pinpoint Test P : The GPSM Does Not Respond To The Scan Tool
- Pinpoint Test Q : The DACM-C Does Not Respond To The Scan Tool
- Pinpoint Test R : The TPM Module Does Not Respond To The Scan Tool
- Pinpoint Test S : The HCM Does Not Respond To The Scan Tool
- Pinpoint Test T : The Sod-L Does Not Respond To The Scan Tool
- Pinpoint Test U : The Sod-R Does Not Respond To The Scan Tool
- Pinpoint Test V : The DSM Does Not Respond To The Scan Tool
- Pinpoint Test W : The HVAC Module Does Not Respond To The Scan Tool
- Pinpoint Test X : The Audio DSP Module Does Not Respond To The Scan Tool
- Pinpoint Test Y : The DDM Does Not Respond To The Scan Tool
- Pinpoint Test Z : The HSWM Does Not Respond To The Scan Tool
- Pinpoint Test Aa : The DCSM Does Not Respond To The Scan Tool
- Pinpoint Test Ab : The VDM Does Not Respond To The Scan Tool
- Pinpoint Test Ac : The IPM-A Does Not Respond To The Scan Tool
- PINPOINT TEST AD : THE Driver Active Motion Seat Module (SCMG) DOES NOT RESPOND TO THE DIAGNOSTIC SCAN TOOL
- PINPOINT TEST AE : THE Passenger Active Motion Seat Module (SCMH) DOES NOT RESPOND TO THE DIAGNOSTIC SCAN TOOL
- Pinpoint Test AF : No HS-Can Communication, All Modules Are Not Responding
- Pinpoint Test Ag : No Ms-Can Communication, All Modules Are Not Responding
- Pinpoint Test Ah : No I-Can Communication, All Modules Are Not Responding
- Pinpoint Test Ai : No Power To The DLC
- Communications Network
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.