Section 361 (Power Steering System): Specifications: Material

2014 Ford F-150 FX2, 2D PickupSECTION Material
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Item Specification Fill Capacity
Motorcraft® MERCON® LV Automatic Transmission Fluid
XT-10-QLVC (US); CXT-10-LV12 (Canada)
MERCON® LV Vacuum Boost 1, 893 ml 1.9L (2.0 qt) Hydro Boost 2, 366 ml 2.4L (2.5 qt)(1)
Multi-Purpose Grease
Motorcraft® XL-5 (aerosol) and/or CRC® SL3151
ESB-M1C93-B -
Threadlock and Sealer
TA-25
WSK-M2G351-A5 -
(1) Capacities listed are average system capacities and may vary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.