SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014F-150 FX2, 2D PICKUPREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 20 (MODULE CONFIGURATION SYSTEM -- F250-F550 SUPER DUTY)DIAGNOSIS AND TESTINGMODULE CONFIGURATIONINSPECTION AND VERIFICATION
2014 Ford F-150 FX2, 2D Pickup

Inspection and Verification

2014 Ford F-150 FX2, 2D PickupSECTION Inspection and Verification
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

This service information provides step-by-step module configuration procedures. Carry out PROGRAMMABLE MODULE INSTALLATION (PMI)  when another service information aricle directs to carry out configuration or when DTCs from the chart are present.

NOTE: Some modules on this vehicle utilize a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground. Continuous memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.
DTC CHART

DTC Description Source Action
B2477 Module Configuration Failure
  • CDIM
  • Dual Climate Controlled Seat Module (DCSM)
  • Driver Seat Module (DSM)
  • Satellite Digital Audio Receiver System (SDARS) module
 CARRY OUT Programmable Module Installation (PMI). REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
B2900 VIN Mismatch
  • ABS module
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0602 Powertrain Control Module Programming Error
  • PCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0605 Internal Control Module Read Only Memory (ROM) Error
  • PCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1635 Tire/Axle Out of Acceptable Range
  • PCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1639 Vehicle ID Block Corrupted, Not Programmed
  • PCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300:00 Internal Control Module Software Incompatibility: No Sub Type Information
  • PCM
  • RCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U201A:51 Control Module Main Calibration Data: Not Programmed
  • ACM (with navigation)
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2050 No Application Present
  • ABS module
  • ACM (without navigation)
  • CDIM
  • DCSM
  • DSM
  • PCM
  • SDARS module
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2051 One or More Calibration Files Missing / Corrupt
  • ABS module
  • ACM (without navigation)
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • ACM (with navigation)
  • Body Control Module (BCM)
  • HVAC module
  • Instrument Panel Cluster (IPC)
  • Restraints Control Module (RCM)
  • Steering Column Control Module (SCCM)
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • ABS module
  • APIM
 CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • ABS module
  • SCCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • APIM
  • ACM (with navigation)
 CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U2200:00 Control Module Configuration Memory Corrupt; No Sub Type Information
  • HVAC module
  • RCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2200:55 Control Module Configuration Memory Corrupt: Not Configured
  • BCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:54 Central Configuration: Missing Calibration
  • Transfer Case Control Module (TCCM)
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:55 Central Configuration: Not Configured
  • TCCM
  • RCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:56 Central Configuration: Invalid/Incompatible Configuration
  • ABS module
  • TCCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:64 Central Configuration: Signal Plausibility Failure
  • ABS module
  • RCM
  • TCCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U3002:62 Vehicle Identification Number: Signal Compare Failed
  • ABS module
  • RCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.