Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014F-150 FX2, 2D PICKUPREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALOEM CONNECTOR END VIEWSMEMORY SET SWITCH CONNECTOR END VIEW (C3246)
2014 Ford F-150 FX2, 2D Pickup
Memory Set Switch Connector End View (C3246)
2014 Ford F-150 FX2, 2D PickupSECTION Memory Set Switch Connector End View (C3246)
| Pin | Circuit | Gauge | Circuit Function | Qualifier |
|---|---|---|---|---|
| 1 | CPS55 (YE-GY) | 22 | Not Used | |
| 2 | CPS15 (VT-WH) | 22 | SWITCH - MEMORY P1 | |
| 3 | * | * | Not Used | |
| 4 | * | * | Not Used | |
| 5 | CPS14 (GY-VT) | 22 | Not Used | |
| 6 | CPS16 (YE) | 22 | SWITCH - MEMORY P2 | |
| 7 | GD904 (BK-BU) | 22 | GROUND - PILLAR A LEFT # 2ND STUD | |
| 8 | * | * | Not Used |
| Available Pigtail Kits | |
|---|---|
| Pigtail Kit Part Number WPT-1219 | Service Part Number: 3U2Z-14S411-DAAC Gauge: 18 Pin material: Silver Cavities: 8 Vehicle Uses
|
| Pigtail Kit Part Number WPT-941 | Service Part Number: 3U2Z-14S411-DAAB Gauge: 18 Pin material: Tin Cavities: 8 Vehicle Uses
|
| Pigtail Kit Part Number WPT-699 | Service Part Number: 3U2Z-14S411-DAAA Gauge: 20 Pin material: Tin Cavities: 8 Vehicle Uses
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.