Heated Oxygen Sensor (Ho2S) #22 Connector End View (C1569)

2014 Ford F-150 FX2, 2D PickupSECTION Heated Oxygen Sensor (Ho2S) #22 Connector End View (C1569)
Fig 1: Identifying Heated Oxygen Sensor No. 22 Connector (C1569)
G09258846Courtesy of FORD MOTOR CO.
Pin Circuit Gauge Circuit Function Qualifier
1 CBB76 (BU-BN) 18 FUSE - 76 OR CIRCUIT BREAKER 15525
1 CBK02 (GN) 18 FUSE - 76 OR CIRCUIT BREAKER (VPWR) 3.5L/12C508
2 CE234 (BU-WH) 18 CTRL MOD. - POWERTRAIN # HEATER OXYGEN SEN. POST CAT. 2ND (HTR22)  
3 RE405 (GN-WH) 18 CTRL MOD. - POWERTRAIN # SIGNAL RETURN ENGINE (SIGRTN) 15525
3 RE407 (YE-VT) 18 CTRL MOD. - POWERTRAIN # SIGNAL RETURN COWL (SIGRTN) 3.5L/12C508
4 VE733 (WH) 18 SENSOR - HEATED OXYGEN POST CAT. 2ND (HO2S22)  
Available Pigtail Kits  
Pigtail Kit Part Number WPT-1288 
G09258847
Service Part Number: CU2Z-14S411-ZA 
Gauge: 16 
Pin material: Silver 
Cavities:
Vehicle Uses
  • Sensor - Catalyst Monitor
  • Sensor - O2 (HEGO/EGO)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.