Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Unlocking the Doors with the Keyless Entry Keypad System
To unlock the driver door (with stepped unlock enabled), enter either the factory set code or the personal code (each digit must be pressed within 5 seconds of the prior digit). This also illuminates the interior lamps.
To unlock all doors with stepped unlock enabled, enter either the factory set code or the personal code (driver door unlocks) and press the 3/4 button within 5 seconds.
To unlock all doors with stepped unlock disabled, enter either the factory set code or the personal code. This also illuminates the interior lamps. Refer to STEPPED UNLOCK PROGRAMMING for information on how to program the stepped unlocking.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.