Accessory Protocol Interface Module (APIM) Custom Programming

2014 Ford F-150 FX2, 2D PickupSECTION Accessory Protocol Interface Module (APIM) Custom Programming
SPECIAL TOOL DESCRIPTION

G06136947
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent diagnostic scan tool.
G07399246
SYNC® Re-Flash Kit CCMSYNC-KIT or equivalent
[Tools are also available individually CCMUSB2-AM-AM-10 (cable) and CCMUSB-AF-BF5 (adapter)]
NOTE: Use this procedure to show all available software options, including Applications, that can be programmed into the APIM  when upgrades become available, or as directed by a TSB. For additional information about choosing the correct APIM  programming procedure, refer to INFORMATION AND ENTERTAINMENT SYSTEM , APIM PROGRAMMING .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.