Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014EXPEDITION KING RANCH, RWDREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXINTERIOR LIGHTING SYSTEM DTCSSMART JUNCTION BOX (SJB)
2014 Ford Expedition King Ranch, RWD
Smart Junction Box (SJB)
2014 Ford Expedition King Ranch, RWDSECTION Smart Junction Box (SJB)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B106E | Solid State Driver Disabled Due to Short Circuit | The module has temporarily disabled an output because an excessive current draw exists (such as a short to ground). The Smart Junction Box (SJB) cannot enable the output until the cause of the short is corrected. ADDRESS all other DTCs first
. After the cause of the concern is corrected, CLEAR the DTCs. REPEAT the self-test. |
| B106F | Module Disabled Due to External Fault | The module has permanently disabled an output because an excessive current draw fault (such as a short to ground) has exceeded the limits that the SJB can withstand. The cause of the excessive current draw MUST be corrected before a new SJB is installed. ADDRESS all other DTCs first . After the cause of the concern is corrected, INSTALL a new SJB . REFER to REMOVAL AND INSTALLATION . TEST the system for normal operation. |
| B1320 | Driver Door Ajar Circuit Open | GO to PINPOINT TEST G . |
| B1328 | Passenger Door Ajar Circuit Open | GO to PINPOINT TEST G . |
| B1336 | Door Ajar RR Circuit Open | GO to PINPOINT TEST G . |
| B1572 | Door Ajar LR Circuit Open | GO to PINPOINT TEST G . |
| B1688 | Lamp Dome Input Circuit Short to Ground | GO to PINPOINT TEST G . |
| B2077 | Liftgate Ajar Sw Circuit Failure | GO to PINPOINT TEST G . |
| B2A35 | Interior Lighting Output Circuit Open | If the courtesy lamps are inoperative, GO to PINPOINT TEST E
. If the courtesy lamps stay on continuously, GO to PINPOINT TEST G . |
| B2A36 | Interior Lighting Output Circuit Short to Ground | GO to PINPOINT TEST G . |
| B2A29 | Floor Lamp Output Circuit Short to Ground | DIAGNOSE all other DTCs and symptoms first. If no other DTCs or symptoms are present, INSPECT the SJB
and C2280A
for bent pins, loose or corroded connections. If no concerns are found, INSTALL a new SJB . REFER to REMOVAL AND INSTALLATION . TEST the system for normal operation. |
| B2A39 | Puddle Lamp Output Circuit Open | If the puddle lamps are inoperative, GO to PINPOINT TEST F
. If the puddle lamps are always on, GO to PINPOINT TEST H . |
| B2A3A | Puddle Lamp Output Circuit Short to Ground | GO to PINPOINT TEST F . |
| All other DTCs | - | REFER to the Diagnostic Trouble Code (DTC) Chart in Diagnostic Trouble Code (DTC) Chart . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.