SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014ESCAPE SE, 2.0L ENG VIN 9, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS (EXCEPT DIESEL & HYBRID)DTC DIAGNOSISU1012 - INVALID INTERNAL CONTROL MODULE MONITORING DATA RECEIVED FROM ANTI-LOCK BRAKE SYSTEM (ABS) CONTROL MODULE
2014 Ford Escape SE, 2.0L Eng VIN 9, AWD

U1012 - Invalid Internal Control Module Monitoring Data Received From Anti-Lock Brake System (Abs) Control Module

2014 Ford Escape SE, 2.0L Eng VIN 9, AWDSECTION U1012 - Invalid Internal Control Module Monitoring Data Received From Anti-Lock Brake System (Abs) Control Module
U1012 - INVALID INTERNAL CONTROL MODULE MONITORING DATA RECEIVED FROM ANTI-LOCK BRAKE SYSTEM (ABS) CONTROL MODULE

Description:  Network DTC concerns occur during module to module communication.
Possible Causes: 
  • Invalid data network concerns - data is transferred within the normal inter-module message, but contains known invalid data. The receiving module logs a DTC related to the invalid data concern.
Diagnostic Aids: 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST QA: UNABLE TO ACTIVATE SELF-TEST/NETWORK COMMUNICATION ERROR .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.