Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014EDGE SE, 4D UTILITY, 2.0L ENG VIN 9REPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXEXTERIOR LIGHTING SYSTEM DTCSBODY CONTROL MODULE (BCM)
2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9
Body Control Module (BCM)
2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9SECTION Body Control Module (BCM)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1115:11 | High Mounted Stop Lamp Control: Circuit Short To Ground | GO to PINPOINT TEST Q . |
| B123A:11 | Left Front Turn Indicator: Circuit Short To Ground | GO to PINPOINT TEST U . |
| B123A:15 | Left Front Turn Indicator: Circuit Short To Battery or Open | GO to PINPOINT TEST U . |
| B123B:11 | Right Front Turn Indicator: Circuit Short To Ground | GO to PINPOINT TEST U . |
| B123B:15 | Right Front Turn Indicator: Circuit Short To Battery or Open | GO to PINPOINT TEST U . |
| B1247:11 | Left Rear Turn Indicator: Circuit Short To Ground | GO to PINPOINT TEST U . |
| B1247:15 | Left Rear Turn Indicator: Circuit Short To Battery or Open | GO to PINPOINT TEST U . |
| B1248:11 | Right Rear Turn Indicator: Circuit Short To Ground | GO to PINPOINT TEST U . |
| B1248:15 | Right Rear Turn Indicator: Circuit Short To Battery or Open | GO to PINPOINT TEST U . |
| B1277:11 | Reverse Lamp: Circuit Short To Ground | GO to PINPOINT TEST AB . |
| B1277:15 | Reverse Lamp: Circuit Short To Battery or Open | If the reverse lamps are inoperative, GO to PINPOINT TEST AB
. If the reverse lamps are always on, GO to PINPOINT TEST AD . |
| B132B:11 | Left Stop/Turn Lamp: Circuit Short To Ground | GO to PINPOINT TEST Q . |
| B132B:15 | Left Stop/Turn Lamp: Circuit Short To Battery or Open | If the stoplamp is inoperative, GO to PINPOINT TEST Q
. If the stoplamp is always on, GO to PINPOINT TEST R . |
| B132C:11 | Right Stop/Turn Lamp: Circuit Short To Ground | GO to PINPOINT TEST Q . |
| B132C:15 | Right Stop/Turn Lamp: Circuit Short To Battery or Open | If the stoplamp is inoperative, GO to PINPOINT TEST Q
. If the stoplamp is always on, GO to PINPOINT TEST R . |
| B1A85:11 | Ambient Light Sensor: Circuit Short To Ground | GO to PINPOINT TEST O . |
| B1A85:13 | Ambient Light Sensor: Circuit Open | GO to PINPOINT TEST O . |
| B1C98:11 | Left Corner Lamp Circuit: Circuit Short To Ground | GO to PINPOINT TEST U . |
| B1C98:15 | Left Corner Lamp Circuit: Circuit Short To Battery or Open | GO to PINPOINT TEST U . |
| B1C99:11 | Right Corner Lamp Circuit: Circuit Short To Ground | GO to PINPOINT TEST U . |
| B1C99:15 | Right Corner Lamp Circuit: Circuit Short To Battery or Open | GO to PINPOINT TEST U . |
| B1D00:11 | Left Low Beam: Circuit Short To Ground | GO to PINPOINT TEST A . |
| B1D00:15 | Left Low Beam: Circuit Short To Battery or Open | If the headlamp is inoperative, GO to PINPOINT TEST A
. If the headlamp is always on, GO to PINPOINT TEST C . |
| B1D01:11 | Right Low Beam: Circuit Short To Ground | GO to PINPOINT TEST A . |
| B1D01:15 | Right Low Beam: Circuit Short To Battery or Open | If the headlamp is inoperative, GO to PINPOINT TEST A
. If the headlamp is always on, GO to PINPOINT TEST C . |
| B1D02:11 | Left High Beam Circuit: Circuit Short To Ground | GO to PINPOINT TEST B . |
| B1D02:15 | Left High Beam Circuit: Circuit Short To Battery or Open | If the headlamp is inoperative, GO to PINPOINT TEST B
. If the headlamp is always on, GO to PINPOINT TEST D . |
| B1D03:11 | Right High Beam Circuit: Circuit Short To Ground | GO to PINPOINT TEST B . |
| B1D03:15 | Right High Beam Circuit: Circuit Short To Battery or Open | If the headlamp is inoperative, GO to PINPOINT TEST B
. If the headlamp is always on, GO to PINPOINT TEST D . |
| B1D35:11 | Hazard Switch: Circuit Short To Ground | GO to PINPOINT TEST V . |
| C0040:12 | Brake Pedal Switch "A": Circuit Short To Battery | GO to PINPOINT TEST R . |
| U1000:00 | Solid State Driver Protection Activated - Driver Disabled: No Sub Type Information | The module has temporarily disabled an output because an excessive current draw exists (such as a short to ground). The Body Control Module (BCM) cannot enable the output until the cause of the short is corrected. ADDRESS all other DTCs first . After the cause of the concern is corrected, CLEAR the DTCs. REPEAT the self-test. |
| U3000:49 | Control Module: Internal Electronic Failure | The module has permanently disabled an output because an excessive current draw fault (such as a short to ground) has exceeded the limits that the BCM can withstand. The cause of the excessive current draw MUST be corrected before a new BCM is installed. ADDRESS all other DTCs first . After the cause of the concern is corrected, INSTALL a new BCM . REFER to MULTIFUNCTION ELECTRONIC MODULES . TEST the system for normal operation. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.