Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014EDGE SE, 4D UTILITY, 2.0L ENG VIN 9REPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXINFORMATION SYSTEM AND ENTERTAINMENT SYSTEM DTCSAUDIO FRONT CONTROL MODULE (ACM)
2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9
Audio Front Control Module (ACM)
2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9SECTION Audio Front Control Module (ACM)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1A01:01 | Speaker #1: General Electrical Failure | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A01:11 | Speaker #1: Circuit Short To Ground | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A01:12 | Speaker #1: Circuit Short To Battery | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A01:13 | Speaker #1: Circuit Open | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A02:01 | Speaker #2: General Electrical Failure | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A02:11 | Speaker #2: Circuit Short To Ground | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A02:12 | Speaker #2: Circuit Short To Battery | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A02:13 | Speaker #2: Circuit Open | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A03:01 | Speaker #3: General Electrical Failure | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A03:11 | Speaker #3: Circuit Short To Ground | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A03:12 | Speaker #3: Circuit Short To Battery | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A03:13 | Speaker #3: Circuit Open | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A04:01 | Speaker #4: General Electrical Failure | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A04:11 | Speaker #4: Circuit Short To Ground | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A04:12 | Speaker #4: Circuit Short To Battery | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A04:13 | Speaker #4: Circuit Open | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A05:02 | Speaker #5: General Signal Failure | For Edge, GO to PINPOINT TEST B
. For MKX, GO to PINPOINT TEST C . |
| B1A06:02 | Speaker #6: General Signal Failure | GO to PINPOINT TEST E . |
| B1A56:21 | Antenna: Signal Amplitude < Minimum | GO to PINPOINT TEST A . |
| B1A89:11 | Satellite Antenna: Circuit Short To Ground | GO to PINPOINT TEST J . |
| B1A89:13 | Satellite Antenna: Circuit Open | GO to PINPOINT TEST J . |
| B1D19:49 | Compact Disc Unit: Internal Electronic Failure | CLEAR the DTCs. REPEAT the self-test. If DTC B1D19:49 is retrieved again, INSTALL a new Audio Front Control Module (ACM). REFER to AUDIO CONTROL MODULE (ACM) . REPEAT the self-test. |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC ) Control Module: No Sub Type Information | GO to PINPOINT TEST V . |
| U0238:00 | Lost Communication With Digital Audio Control Module "D": No Sub Type Information |
NOTE:
This DTC is only applicable for vehicles with an audio DSP
module. For all others, disregard the DTC. GO to PINPOINT TEST Z
. |
| U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | GO to PINPOINT TEST AA . |
| U0256:00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to PINPOINT TEST AB . |
| U0257:00 | Lost Communication With Front Controls/Display Interface Module: No Sub Type Information | GO to PINPOINT TEST AC . |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new ACM . REFER to AUDIO CONTROL MODULE (ACM) . REPEAT the self-test. |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:42 is retrieved again, INSTALL a new ACM . REFER to AUDIO CONTROL MODULE (ACM) . REPEAT the self-test. |
| U3000:96 | Control Module: Component Internal Failure | GO to PINPOINT TEST J . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AD . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AE . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.