SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014EDGE SE, 4D UTILITY, 2.0L ENG VIN 9REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 20 (MODULE CONFIGURATION SYSTEM)DIAGNOSIS AND TESTINGMODULE CONFIGURATIONINSPECTION AND VERIFICATION
2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9

Inspection and Verification

2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9SECTION Inspection and Verification
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

This article provides step-by-step module configuration procedures. Carry out PROGRAMMABLE MODULE INSTALLATION (PMI)  when another article directs to carry out configuration or when DTCs from the chart are present.

NOTE: Some modules on this vehicle utilize a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground. Continuous memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.
DTC Description Source Action
B2477 Module Configuration Failure
  • ACM (without navigation)
  • CDIM
  • Dual Climate Controlled Seat Module (DCSM)
  • Driver Seat Module (DSM)
 CARRY OUT Programmable Module Installation (PMI). REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0602 Powertrain Control Module Programming Error
  • PCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0605 Internal Control Module Read Only Memory (ROM) Error
  • PCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1635 Tire/Axle Out of Acceptable Range
  • PCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1639 Vehicle ID Block Corrupted, Not Programmed
  • PCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300:00 Internal Control Module Software Incompatibility: No Sub Type Information
  • PCM
  • RCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U201A:51 Control Module Main Calibration Data: Not Programmed
  • ACM (with navigation)
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2050 No Application Present
  • ACM (without navigation)
  • CDIM
  • DSM
  • PCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2051 One or More Calibration Files Missing/Corrupt
  • ACM (without navigation)
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • ABS module
  • ACM (with navigation)
  • Audio DSP module
  • Body Control Module (BCM)
  • GPSM
  • HVAC module
  • Instrument Panel Cluster (IPC)
  • Restraints Control Module (RCM)
  • Steering Column Control Module (SCCM)
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • APIM
 CARRY OUT APIM programming. Refer to the appropriate Information and Entertainment Systems article for the procedure.
U2100:55 Initial Configuration Not Complete: No Sub Type Information
  • HSWM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • ABS module
  • ACM (with navigation)
  • Audio DSP module
  • GPSM
  • SCCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • APIM
 CARRY OUT APIM programming. Refer to the appropriate Information and Entertainment Systems article for the procedure.
U2200:00 Control Module Configuration Memory Corrupt; No Sub Type Information
  • RCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2200:55 Control Module Configuration Memory Corrupt: Not Configured
  • BCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:54 Central Configuration: Missing Calibration
  • Transfer Case Control Module (TCCM)
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:55 Central Configuration: Not Configured
  • TCCM
  • RCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:56 Central Configuration: Invalid/Incompatible Configuration
  • ABS module
  • BCM
  • TCCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2300:64 Central Configuration: Signal Plausibility Failure
  • ABS module
  • RCM
  • TCCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U3002:62 Vehicle Identification Number: Signal Compare Failed
  • ABS module
  • RCM
 CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.