Steering Column Control Module (SCCM)

2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9SECTION Steering Column Control Module (SCCM)
DTC INDEX

DTC Description Action
B1007:09 High-Beam Headlamp Switch: Component Failure INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation.
If the concern still exists, INSTALL a new SCCM  . REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation.
B1D36:09 Turn Indicator Switch: Component Failure INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation.
If the concern still exists, INSTALL a new SCCM  . REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation.
All other DTCs - REFER to the DIAGNOSTIC TROUBLE CODE (DTC) CHART .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.