SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014EDGE SE, 4D UTILITY, 2.0L ENG VIN 9REPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALWIRING DIAGRAMSOEM CONNECTOR END VIEWSKNOCK SENSOR 1 (KS1) CONNECTOR END VIEW (C1614)
2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9

Knock Sensor 1 (KS1) Connector End View (C1614)

2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9SECTION Knock Sensor 1 (KS1) Connector End View (C1614)
Fig 1: Identifying Knock Sensor 1 Connector (C1614)
G09229743Courtesy of FORD MOTOR CO.
Pin Circuit Gauge Circuit Function Qualifier
1 RE323 (WH-BN) 20 CTRL MOD. - POWERTRAIN # KNOCK SENSOR 1ST BANK 1ST OR UNIQUE (KS1-)  
2 VE801 (VT-OG) 20 SENSOR - KNOCK 1ST BANK 1ST OR UNIQUE (KS1+)  
Available Pigtail Kits  
Pigtail Kit Part Number WPT-987 
G09229744
 Service Part Number: 3U2Z-14S411-CZAB 
Gauge: 16 
Pin material: Tin (greased) 
Cavities: 2 
Vehicle Uses
  • Sensor - Cylinder Head Temperature
  • Sensor - Knock
Pigtail Kit Part Number WPT-418 
G09229745
 Service Part Number: 3U2Z-14S411-JA 
Gauge: 16 
Pin material: Gold 
Cavities: 2 
Vehicle Uses
  • Sensor - Knock
Pigtail Kit Part Number WPT-707 
G09229746
 Service Part Number: 3U2Z-14S411-CZAA 
Gauge: 18 
Pin material: Tin 
Cavities: 2 
Vehicle Uses
  • Sensor - Knock
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.