Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014EDGE SE, 4D UTILITY, 2.0L ENG VIN 9REPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSINFORMATION SYSTEM AND ENTERTAINMENT SYSTEMGENERAL PROCEDURESACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING - STANDARD, 8-INCH (203 MM) TOUCHSCREEN
2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9
Accessory Protocol Interface Module (APIM) Programming - Standard, 8-Inch (203 mm) Touchscreen
2014 Ford Edge SE, 4D Utility, 2.0L Eng VIN 9SECTION Accessory Protocol Interface Module (APIM) Programming - Standard, 8-Inch (203 mm) Touchscreen
SPECIAL TOOL DESCRIPTION
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool | |
| SYNC® Re-Flash Kit CCMSYNC-KIT or equivalent (Tools are also available individually CCMUSB2-AM-AM-10 [cable] and CCMUSB-AF-BF5 [adapter]) |
NOTE:
Use this procedure to update the Accessory Protocol Interface Module (APIM) and any installed Applications to the latest level. For additional information on choosing the correct programming procedure, refer to INFORMATION AND ENTERTAINMENT SYSTEM , APIM PROGRAMMING .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.