SYS.OK|MANUAL.DB● LIVE
2014 Ford E-150 XL, 4.6L Eng VIN W

Quick Lookups: Fluids

2014 Ford E-150 XL, 4.6L Eng VIN WSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/o Rear AC 8.00 OZS. 0.23 L PAG 46 S
Air Cond Compressor Oil w/Rear A/C 16.00 OZS. 0.47 L PAG 46 S
Air Cond Refrigerant w/Auxiliary Air Cond 3.38 LBS. 1.53 KG R-134a S
Air Cond Refrigerant w/o Auxiliary Air Cond 1.88 LBS. 0.85 KG R-134a S
Automatic Transmission Fluid 13.90 QTS. 13.15 L MOTORCRAFT Automatic Transmission Fluid MERCON LV Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use only Automatic Transmission Fluid MERCON LV. S
Brake Fluid N/A N/A MOTORCRAFT DOT 4 LV High Performance Brake Fluid, or equivalent. Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. S
Differential Gear Oil Dana Conventional Axle Fluid M60 (M248) 6.20 PTS. 2.93 L MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant Fill to 1/4" to 9/16" below bottom of fill hole. S
Engine Coolant 4.6L Eng w/Aux Rear Heater 26.00 QTS. 24.6 L MOTORCRAFT Premium Gold Engine Coolant (yellow-colored) Add the coolant type originally equipped in the vehicle. S
Engine Coolant 4.6L Eng w/o Aux Rear Heater 23.80 QTS. 22.52 L MOTORCRAFT Premium Gold Engine Coolant (yellow-colored) Add the coolant type originally equipped in the vehicle. S
Engine Oil w/Filter 6.00 QTS. 5.67 L MOTORCRAFT SAE 5W-20 Motor Oil or equivalent The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system. S
Power Steering Fluid N/A N/A MOTORCRAFT Automatic Transmission Fluid MERCON V Keep it in "full" range on dipstick. S
Windshield Washer Fluid N/A N/A MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.