Module Configuration DTCS

2014 Ford E-150 Base, Van Cargo, 4.6L Eng VIN WSECTION Module Configuration DTCS
DTC INDEX

DTC Description Source Action
B2477 Module Configuration Failure ABS module (without Roll Stability Control (RSCĀ®))
Audio Front Control Module (ACM) (without navigation) Parking Aid Module (PAM) Smart Junction Box (SJB)
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
B2900 VINĀ  Mismatch ABS module CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0602 Powertrain Control Module Programming Error PCM CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0605 Internal Control Module Read-Only Memory (ROMĀ  ) Error PCM CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1639 Vehicle ID Block Corrupted, Not Programmed PCM CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300 Internal Control Module Software Incompatibility PCM CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300:00 Internal Control Module Software Incompatibility: No Sub Type Information Restraints Control Module (RCM) REFER to SUPPLEMENTAL RESTRAINT SYSTEM .
U201A:51 Control Module Main Calibration Data: Not Programmed ACMĀ  (with navigation) REFER to INFORMATION AND ENTERTAINMENT SYSTEMS .
U2050 No Application Present ABS module
ACMĀ  (without navigation) SJBĀ 
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2051 One or More Calibration Files Missing/Corrupt ABS module PAMĀ 
ACMĀ  (without navigation)
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information ACMĀ  (with navigation) Instrument Panel Cluster (IPC) RCMĀ  CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information APIMĀ  CARRY OUT APIMĀ  programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information ACMĀ  (with navigation) REFER to INFORMATION AND ENTERTAINMENT SYSTEMS .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information APIMĀ  CARRY OUT APIMĀ  programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information RCMĀ  REFER to SUPPLEMENTAL RESTRAINT SYSTEM .
U2202 Invalid Configuration Data Received Trailer Brake Control (TBC) module REFER to AUXILIARY BRAKE SYSTEM .
U3000:46 Control Module: Calibration/Parameter Memory Failure RCMĀ  CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U3002:62 Vehicle Identification Number: Signal Compare Failure RCMĀ  CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.