Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014E-150 BASE, VAN CARGO, 4.6L ENG VIN WREPAIR AND DIAGNOSISENGINE MECHANICALMECHANICALENGINE MECHANICAL - 4.6L (2V)SPECIFICATIONSTORQUE SPECIFICATIONS
2014 Ford E-150 Base, Van Cargo, 4.6L Eng VIN W
Torque Specifications
2014 Ford E-150 Base, Van Cargo, 4.6L Eng VIN WSECTION Torque Specifications
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| A/C compressor bolts | 25 | 18 | - | ||
| A/C compressor discharge tube nut | 15 | - | 133 | ||
| A/C compressor suction tube nut | 15 | - | 133 | ||
| A/C condensor core bracket bolts | 12 | - | 106 | ||
| A/C evaporator tube nut | 15 | - | 133 | ||
| Accessory drive belt idler pulley bolt | 25 | 18 | - | ||
| Camshaft bearing cap bolts (1) | - | - | - | ||
| Camshaft Position (CMP) sensor bolt | 10 | - | 89 | ||
| Camshaft sprocket bolts(1) | - | - | - | ||
| Connecting rod bolts(1) | - | - | - | ||
| Coolant pump bolts | 25 | 18 | - | ||
| Coolant pump pulley bolts | 25 | 18 | - | ||
| Cooling fan clutch nut | 133 | 98 | - | ||
| Cooling fan shroud bolts | 6 | - | 53 | ||
| Crankshaft main bearing side bolts(1) | - | - | - | ||
| Crankshaft main bearing bolts (vertical)(1) | - | - | - | ||
| Crankshaft main bearing jackscrews(1) | - | - | - | ||
| Crankshaft Position (CKP) sensor bolt | 10 | - | 89 | ||
| Crankshaft pulley bolt(1) | - | - | - | ||
| Crankshaft rear seal retainer plate bolts(1) | - | - | - | ||
| Cylinder block drain plugs | 20 | - | 177 | ||
| Cylinder heads bolts(1) | - | - | - | ||
| Cylinder Head Temperature (CHT) sensor | 26 | 19 | - | ||
| EGR system module-to-intake manifold bolts(1) | - | - | - | ||
| Engine coolant crossover assembly bolts | 10 | - | 89 | ||
| Engine front cover bolts(1) | - | - | - | ||
| Engine oil filler tube support bracket | 9 | - | 80 | ||
| Engine Oil Pressure (EOP) switch(1) | - | - | - | ||
| Engine support insulator-to-cylinder block bolts and nut | 80 | 59 | - | ||
| Engine support insulator-to-engine support insulator bracket nuts | 90 | 66 | - | ||
| Engine support insulator bracket-to-crossmember nuts | 90 | 66 | - | ||
| Engine wiring harness support bracket nut | 10 | - | 89 | ||
| Evaporative Emission (EVAP) canister purge valve bolt | 10 | - | 89 | ||
| Exhaust manifold nuts(1) | - | - | - | ||
| Exhaust manifold studs | 12 | - | 106 | ||
| Exhaust manifold-to-EGR system module tube fittings | 42 | 31 | - | ||
| Exhaust manifold-to-Y-pipe flange nuts | 40 | 30 | - | ||
| Flexplate bolts(1) | - | - | - | ||
| Flexplate inspection cover bolts | 34 | 25 | - | ||
| Fuel rail bolts | 10 | - | 89 | ||
| Generator B+ terminal nut | 8 | - | 71 | ||
| Generator support bracket bolts and stud bolts | 10 | - | 89 | ||
| Generator lower mounting bolts | 25 | 18 | - | ||
| Ground cable bolt | 10 | - | 89 | ||
| Ground cable nut | 10 | - | 89 | ||
| Heater outlet tube stud | 25 | 18 | - | ||
| Hood latch bolts | 12 | - | 106 | ||
| Ignition coil bolt | 6 | - | 53 | ||
| Intake manifold bolts(1) | - | - | - | ||
| Knock Sensor (KS) | 20 | - | 177 | ||
| Lower radiator support bolts | 20 | - | 177 | ||
| Oil cooler threaded insert | 58 | 43 | - | ||
| Oil filter | 16 | - | 142 | ||
| Oil filter adapter front bolts | 25 | 18 | - | ||
| Oil filter adapter front nuts | 25 | 18 | - | ||
| Oil filter adapter rear bolt | 48 | 35 | - | ||
| Oil filter adapter studs | 12 | - | 106 | ||
| Oil level indicator tube front support bracket nut | 10 | - | 89 | ||
| Oil level indicator tube rear support bracket bolt | 10 | - | 89 | ||
| Oil pan bolts(1) | - | - | - | ||
| Oil pan drain plug | 23 | 17 | - | ||
| Oil pump bolts(1) | - | - | - | ||
| Oil pump screen and pickup tube-to-oil pump bolts | 10 | - | 89 | ||
| Oil pump screen and pickup tube spacer | 25 | 18 | - | ||
| Oil pump screen and pickup tube-to-spacer bolt | 25 | 18 | - | ||
| Power Distribution Box (PDB) battery feed cable nut | 8 | - | 71 | ||
| Power Steering Pressure (PSP) tube | 20 | - | 177 | ||
| Power steering pump bolts | 25 | 18 | - | ||
| Power steering reservoir bracket bolts | 20 | - | 177 | ||
| Radio ignition interference capacitor nut | 25 | 18 | - | ||
| Spark plugs | 18 | - | 159 | ||
| Thermostat housing bolts(1) | - | - | - | ||
| Throttle Body (TB) bolts(1) | - | - | - | ||
| Timing chain guide bolts | 10 | - | 89 | ||
| Timing chain hydraulic tensioner bolts | 25 | 18 | - | ||
| Transmission fluid cooler bolt | 10 | - | 89 | ||
| Transmission fluid filler tube support bracket front bolt | 10 | - | 89 | ||
| Transmission fluid filler tube rear bolt | 28 | 21 | - | ||
| Transmission shift cable mounting bracket bolts | 25 | 18 | - | ||
| Transmission-to-engine bolts | 60 | 44 | - | ||
| Torque converter-to-flexplate nuts | 35 | 26 | - | ||
| Upper radiator support bolts | 20 | - | 177 | ||
| Valve cover bolts(1) | - | - | - | ||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.