Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014E-150 BASE, VAN CARGO, 4.6L ENG VIN WREPAIR AND DIAGNOSISENGINE MECHANICALMECHANICALENGINE MECHANICAL - 4.6L (2V)DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIESINTAKE MANIFOLD ASSEMBLYNOTES
2014 Ford E-150 Base, Van Cargo, 4.6L Eng VIN W
Intake Manifold Assembly: Notes
2014 Ford E-150 Base, Van Cargo, 4.6L Eng VIN WSECTION Notes
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada) |
WSS-M2C945-A |
| Item | Part Number | Description |
|---|---|---|
| 1 | N804394 | Fuel rail bolt (4 required) |
| 2 | - | Fuel injector-to-fuel rail lock (8 required) |
| 3 | 9F792 | Fuel rail |
| 4 | 9229 | Fuel injector-to-fuel rail O-ring seal (8 required) |
| 5 | 9F593 | Fuel injector (8 required) |
| 6 | 9229 | Fuel injector-to-intake manifold O-ring seal (8 required) |
| 7 | 9J447 | Engine coolant crossover assembly |
| 8 | 9461 | Engine coolant crossover assembly RH gasket |
| 9 | 9462 | Engine coolant crossover assembly LH gasket |
| 10 | N807071 | Engine coolant crossover assembly bolt (6 required) |
| 11 | 9424 | Intake manifold |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.