Engine Induction System

2014 Ford E-150 Base, Van Cargo, 4.6L Eng VIN WSECTION Engine Induction System
Fig 1: Identifying Engine Induction System Related Components
G06138105Courtesy of FORD MOTOR CO.
Item Part Number Description
1 9E498 Vacuum harness
2 N811425 Fuel rail bolt (4 required)
3 9F792 Fuel rail
4 W704693 Thermostat housing bolt (2 required)
5 8594 Thermostat housing
6 N806807 Thermostat O-ring seal
7 8575 Thermostat
8 9F593 Fuel injector (8 required)
9 W711062 Ignition coil bolt (8 required)
10 12A366 Ignition coil (8 required)
11 9Y456 EGR system module
12 W503301 Intake manifold bolt (9 required)
13 W701592 Throttle Body (TB) bolt (4 required)
14 9F991 TBΒ  assembly
15 9E930 TBΒ  gasket
16 9S455 Intake manifold
17 9439 Intake manifold gasket (2 required)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.