Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Roof Opening Panel: Overview
The roof opening panel assembly is equipped with a power shade, fixed glass panel and a sliding glass panel. The sliding glass panel and shade are equipped with one-touch open and one-touch close (with obstacle detection) features. One-touch operation can be stopped at any time by pressing the roof opening panel switch a second time.
The accessory delay relay, located in the BCM , provides voltage for the operation of the power windows and the roof opening panel. For additional information, REFER to GLASS, FRAMES AND MECHANISMS - DELAYED ACCESSORY POWER .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.