General Specifications

2013 Ford Explorer Police Interceptor, AWDSECTION General Specifications
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Item Specification
Generator, Single (6.2L Base)Β 
Pulley ratio 2.95:1
Rating 79 amps at 650 RPM (min) to 157 amps at 2, 000 RPM (max)
Voltage regulator type Electronic internal with generator
Generator, Single (6.2L Optional)Β 
Pulley ratio 2.95:1
Rating 119 amps at 650 RPM (min) to 200 amps at 2, 000 RPM (max)
Voltage regulator type Electronic internal with generator
Generator, Dual Left (6.7L Primary)Β 
Pulley ratio 3.09:1
Rating 119 amps at 650 RPM (min) to 200 amps at 2, 000 RPM (max)
Voltage regulator type Electronic internal with generator
Generator, Dual Right (6.7L Secondary)Β 
Pulley ratio 2.71:1
Rating 72 amps at 650 RPM (min) to 157 amps at 2, 000 RPM (max)
Voltage regulator type Electronic internal with generator
Generator, Single (6.7L)Β 
Pulley ratio 3:09:1
Rating 85 amps at 650 RPM (min) to 157 amps at 2, 000 RPM (max)
Voltage regulator type Electronic internal with generator
Generator, Single (6.7L Optional)Β 
Pulley ratio 3.09:1
Rating 119 amps at 650 RPM (min) to 200 amps at 2, 000 RPM (max)
Voltage regulator type Electronic internal with generator
Generator, Single (6.8L)Β 
Pulley ratio 2.95:1
Rating 104 amps at 600 RPM (min) to 175 amps at 2, 000 RPM (max)
Voltage regulator type Electronic internal with generator
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.