DTC P2122: Throttle/Pedal Position Sensor/Switch D Circuit Low

2013 Ford Expedition EL King Ranch, RWDSECTION DTC P2122: Throttle/Pedal Position Sensor/Switch D Circuit Low
DTC P2122: THROTTLE/PEDAL POSITION SENSOR/SWITCH D CIRCUIT LOW

Description:  This DTC sets when the accelerator pedal position 1 (APP1) is out of self-test range low.
Possible Causes: 
  • APP1 circuit open
  • APP1 circuit short to ground
  • Damaged APP sensor
Diagnostic Aids:  An APP1 or APP_D sensor PID reading may indicate a concern.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST DK .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.