Rain Sensor Module Connector End View (C914)

2013 Ford Expedition EL King Ranch, RWDSECTION Rain Sensor Module Connector End View (C914)
Fig 1: Identifying Rain Sensor Module Connector (C914)
G08735297Courtesy of FORD MOTOR CO.
Pin Circuit Gauge Circuit Function Qualifier
1 GD133 (BK) 20 GROUND - PILLAR A LEFT  
2 VRW06 (GN-WH) 20 SENSOR - RAIN  
3 * * Not Used  
4 CBP43 (GY) 20 FUSE - 43 OR CIRCUIT BREAKER  
Available Pigtail Kits 
Pigtail Kit Part Number WPT-1155 
G08735298
Service Part Number: AU2Z-14S411-BRA 
Gauge: 20 
Pin material: Tin 
Cavities:
Vehicle Uses
  • Sensor - Rain
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.