Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2010TRANSIT CONNECT VAN CARGOREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSION - AUTOMATIC TRANSAXLE/TRANSMISSIONDISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIESPLANETARY ASSEMBLYDISASSEMBLY

2010 Ford Transit Connect Van Cargo

Planetary Assembly: Disassembly

2010 Ford Transit Connect Van CargoSECTION Disassembly

Inspect the planet internal bearing for damage.

Fig 1: Checking Planet Internal Bearing For Damage
Courtesy of FORD MOTOR CO.
Remove the snap ring.

Fig 2: Locating Snap Ring
Courtesy of FORD MOTOR CO.
Remove the rear planet assembly.

Fig 3: Locating Rear Planet Assembly
Courtesy of FORD MOTOR CO.
Remove the thrust bearing.

Fig 4: Locating Thrust Bearing
Courtesy of FORD MOTOR CO.
Remove the forward planet sun gear.

Fig 5: Locating Forward Planet Sun Gear
Courtesy of FORD MOTOR CO.
Remove the thrust bearing.

Fig 6: Locating Thrust Bearing
Courtesy of FORD MOTOR CO.
Remove the forward planet assembly.

Fig 7: Locating Forward Planet Assembly
Courtesy of FORD MOTOR CO.
Inspect the low and reverse ring gear.

Fig 8: Locating Low And Reverse Ring Gear
Courtesy of FORD MOTOR CO.
Remove the top retainer of the One-Way Clutch (OWC).

Fig 9: Locating Top Retainer Of One-Way Clutch
Courtesy of FORD MOTOR CO.
Remove the top OWC ring.

Fig 10: Locating Top OWC Ring
Courtesy of FORD MOTOR CO.
Remove the low OWC assembly.

Fig 11: Locating Low OWC Assembly
Courtesy of FORD MOTOR CO.
Remove the lower one-way ring.

Fig 12: Locating Lower One-Way Ring
Courtesy of FORD MOTOR CO.