SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010TRANSIT CONNECT VAN CARGOREPAIR AND DIAGNOSIS (SINGLE PAGE)TRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSION - AUTOMATIC TRANSAXLE/TRANSMISSIONDISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIESPUMP ASSEMBLYDISASSEMBLY
2010 Ford Transit Connect Van Cargo

Pump Assembly: Disassembly

2010 Ford Transit Connect Van CargoSECTION Disassembly
  1. Remove the top portion of the pump.
    Fig 1: Locating Pump Bolts
    G06292979Courtesy of FORD MOTOR CO.
  2. Inspect the lower portion of the pump and gear pocket for nicks, scratches, gouges or wear.
    Fig 2: Checking Lower Portion Of Pump And Gear Pocket For Nicks, Scratches, Gouges Or Wear
    G06292980Courtesy of FORD MOTOR CO.
  3. Remove the pump seal.
    Fig 3: Locating Pump Seal
    G06292981Courtesy of FORD MOTOR CO.
  4. Inspect the upper portion of the pump for nicks, scratches or gouges.
    Fig 4: Checking Upper Portion Of Pump For Nicks, Scratches Or Gouges
    G06292982Courtesy of FORD MOTOR CO.
  5. Inspect the pump gears for nicks, scratches or gouges.
    Fig 5: Checking Pump Gears For Nicks, Scratches Or Gouges
    G06292983Courtesy of FORD MOTOR CO.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.