Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010TRANSIT CONNECT VAN CARGOREPAIR AND DIAGNOSIS (SINGLE PAGE)TRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSION - AUTOMATIC TRANSAXLE/TRANSMISSION - EXTERNAL CONTROLSDESCRIPTION AND OPERATIONEXTERNAL CONTROLSSELECTOR LEVER BUTTON
2010 Ford Transit Connect Van Cargo
Selector Lever Button
2010 Ford Transit Connect Van CargoSECTION Selector Lever Button
- Allows the driver to move the selector lever from the PARK position, the ignition must be turned to the ON position, brake pedal must be pressed and selector lever release button pressed in.
- The selector lever button must also be pressed, if the lever is moved from:
- N and D to 2 and 1.
- 1, 2, D and N to R and P.
- R to P.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.