Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010TRANSIT CONNECT VAN CARGOREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTSUSPENSION SYSTEM - GENERAL INFORMATIONSPECIFICATIONSITEM SPECIFICATION
2010 Ford Transit Connect Van Cargo
Item Specification
2010 Ford Transit Connect Van CargoSECTION Item Specification
ITEM SPECIFICATION
| Item | LH | RH | Total/Split |
|---|---|---|---|
| Front | |||
| Camber | -0.61° ± 1.00° | -0.61° ± 1.00° | 0° ± 0.5° |
| Caster | 1.80° ± 1.0° | 1.80° ± 1.0° | 0° ± 1.0° |
| Toe (positive value is toe-in, negative value is toe-out) | - | - | 0.43° ± 0.15° |
| Rear | |||
| Camber | -1.00° ± 1.00° | -1.00° ± 1.00° | 0° ± 1.00° |
| Toe (positive value is toe-in, negative value is toe-out) | - | - | 0.30° ± 0.30° |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.