Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010TRANSIT CONNECT VAN CARGOREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALFUEL SYSTEMFUEL CHARGING SYSTEM & FUEL CONTROL SYSTEMREMOVAL AND INSTALLATIONFUEL RAIL AND FUEL INJECTOR - EXPLODED VIEW
2010 Ford Transit Connect Van Cargo
Fuel Rail and Fuel Injector - Exploded View
2010 Ford Transit Connect Van CargoSECTION Fuel Rail and Fuel Injector - Exploded View
FUEL RAIL AND FUEL INJECTOR PART NUMBER REFERENCE
| Item | Part Number | Description |
|---|---|---|
| 1 | W500225 | Fuel rail bolt (2 required) |
| 2 | 9H487 | Fuel rail |
| 3 | 9J280 | Fuel jumper tube |
| 4 | - | Fuel jumper tube-to-fuel rail spring lock coupling (part of 9J280) |
| 5 | 9U509 | Fuel injector O-ring seals (2 required per injector) |
| 6 | 9F593 | Fuel injector (4 required) |
| 7 | 9C995 | Fuel injector clip (4 required) |
| 8 | 14A464 | Fuel injector electrical connector (4 required) (part of 12B637) |
- For additional information, refer to the appropriate procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.