Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Disable MyKey™ Restricted Features
2010 Ford Taurus SEL, FWDSECTION Disable MyKey™ Restricted Features
NOTE:
If disabling an IA key, make sure only the admin key is inside the vehicle. It does not need to be in the backup transceiver slot.
-
NOTE: This procedure is used to disable the MyKey™ feature on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.
Using an admin key, turn the ignition ON.
If the vehicle has the IA system, a (PATS) programmed IA key only needs to be inside the vehicle. It does not need to be in the backup transceiver slot.
- Press SETUP until PRESS RESET TO CLEAR MYKEY appears.
- Press and hold RESET until HOLD RESET TO CONFIRM CLEAR and ALL KEYS ARE CLEARED is displayed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.