Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications
2010 Ford Taurus SEL, FWDSECTION Torque Specifications
TORQUE SPECIFICATIONS
| Description | N.m | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Charge Air Cooler (CAC) outlet tube-to-Throttle Body (TB) clamp | 5 | - | 44 | ||
| Fuel injection pump bolts (1) | - | - | - | ||
| Fuel jumper tube bolt | 10 | - | 89 | ||
| Fuel Pump (FP) control module nuts | 5 | - | 44 | ||
| Fuel rail bolts (3.5L) | 10 | - | 89 | ||
| Fuel rail bolts (3.5L Gasoline Turbocharged Direct Injection (GTDI)) (1) | - | - | - | ||
| Fuel Rail Pressure (FRP) sensor | 33 | 24 | - | ||
| High pressure fuel tube bolt | 6 | - | 53 | ||
| High pressure fuel tube flare nut | 30 | 22 | - | ||
| High pressure fuel tube nut | 6 | - | 53 | ||
| TB bolts (3.5L) | 10 | - | 89 | ||
| TB bolts (3.5L GTDI) | 10 | - | 89 | ||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.