Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Steering Wheel Rotation Sensor
The steering wheel rotation sensor (on vehicles equipped with HPAS ) measures the rate of rotation of the steering wheel by monitoring a slotted-wheel as it passes through the sensor gap. The rotation sensor uses 2 signal lines to transmit information to the ABS module about whether the steering wheel is being turned left or right and how far it is being turned. The rotation sensor does not indicate the position of the steering wheel relative to straight-ahead.
On vehicles equipped with EPAS , the steering angle and rotation information is transmitted to the ABS module over the HS-CAN bus from the PSCM .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.