Material Specifications

2010 Ford Mustang Base, 2D Coupe, AutomaticSECTION Material Specifications
WARNING: This page is about a different variant/trim than selected.
MATERIAL SPECIFICATIONS

Item Specification Fill Capacity
Motorcraft® Metal Surface Prep
ZC-31-A
- -
Motorcraft® Premium Gold Engine Coolant with Bittering Agent (US); Motorcraft® Premium Gold Engine Coolant (Canada)
VC-7-B (US); CVC-7-A (Canada); or equivalent (yellow color)
WSS-M97B51-A1 -
Motorcraft® SAE 5W-50 Full Synthetic Motor Oil
XO-5W50-QGT or equivalent
WSS-M2C931-B 6.0L (6.5 qt) with filter
Silicone Brake Caliper Grease and Dielectric Compound
XG-3-A
ESE-M1C171-A -
Silicone Gasket and Sealant
TA-30
WSE-M4G323-A4 -
Silicone Gasket Remover
ZC-30
- -
Threadlock and Sealer
TA-25
WSK-M2G351-A5 -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.