Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010MUSTANG BASE, 2D COUPE, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 2 (ENGINE MECHANICAL - 5.4L (4V))DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIESINTAKE MANIFOLD ASSEMBLYMATERIAL
2010 Ford Mustang Base, 2D Coupe, Automatic
Intake Manifold Assembly: Material
2010 Ford Mustang Base, 2D Coupe, AutomaticSECTION Material
WARNING: This page is about a different variant/trim than selected.
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® Premium Gold Engine Coolant with Bittering Agent (US); Motorcraft® Premium Gold Engine Coolant (Canada) VC-7-B (US); CVC-7-A (Canada); or equivalent (yellow color) |
WSS-M97B51-A1 |
| Motorcraft® SAE 5W-50 Full Synthetic Motor Oil XO-5W50-QGT or equivalent |
WSS-M2C931-B |
| Threadlock and Sealer TA-25 |
WSK-M2G351-A5 |
Intake Manifold Assembly (View 1 of 3)
ITEM DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | 18C553 | Heater hose |
| 2 | - | Heater hose clamp (part of 18C553) |
| 3 | W527352 | Supercharger (SC) bubbler hose clamp |
| 4 | 6C324 | SC bubbler hose |
| 5 | 9E498 | Lower SC bypass actuator vacuum tube |
| 6 | 9E498 | Upper SC bypass actuator vacuum tube |
| 7 | W701232 | EGR system module bolt (2 required) |
| 8 | 9Y456 | EGR system module |
| 9 | 9D476 | EGR system module gasket |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.